ms300t

Mack Ms300T (1982) – 82V054000

Vehicle recall defect – The Circuit Wiring On These Vehicles Is Arranged So That A Short Circuit In The Rear Taillights Will Also Result In Loss Of Power To The Headlamps. For Safety Reasons The Lighting System Wiring Should Be Independent.


Mack Ms300T (1981) – 83V102000

Vehicle recall defect – The Yoke Of The Transmission Propeller Shaft May Lack Required Strength Due To Erroneous Counterbore Operation In Which 10 Millimeters Of Extra Material May Have Been Cut. This Condition Could Lead To Fracture Of The Yoke In Service.


Mack Ms300T (1981) – 82V054000

Vehicle recall defect – The Circuit Wiring On These Vehicles Is Arranged So That A Short Circuit In The Rear Taillights Will Also Result In Loss Of Power To The Headlamps. For Safety Reasons The Lighting System Wiring Should Be Independent.


Mack Ms300T (1981) – 81V089000

Vehicle recall defect – Holes Drilled In The Rear Axle Yokes To Balance Them Could Cause A Failure Of The Yoke.


Mack Ms300T (1981) – 81V032000

Vehicle recall defect – On Certain Vehicles, The Semi-Trailer Stop Lights May Not Activate When Hand Control Lever Is Activated.


Mack Ms300T (1980) – 82V054000

Vehicle recall defect – The Circuit Wiring On These Vehicles Is Arranged So That A Short Circuit In The Rear Taillights Will Also Result In Loss Of Power To The Headlamps. For Safety Reasons The Lighting System Wiring Should Be Independent.


Mack Ms300T (1980) – 81V089000

Vehicle recall defect – Holes Drilled In The Rear Axle Yokes To Balance Them Could Cause A Failure Of The Yoke.


Mack Ms300T (1979) – 82V054000

Vehicle recall defect – The Circuit Wiring On These Vehicles Is Arranged So That A Short Circuit In The Rear Taillights Will Also Result In Loss Of Power To The Headlamps. For Safety Reasons The Lighting System Wiring Should Be Independent.


Mack Ms300T (1988) – 89V035000

Vehicle recall defect – Total Capacity Of Air Brake Reservoir May Be Slightly Less Than Required By Fmvss 121.


Mack Ms300T (1988) – 88V124000

Vehicle recall defect – Power Steering Pumps May Have A Ridge Inside The Aluminum Housing Which Could Detach Itself From The Housing And Become Wedged Inside The Relief Valve, Keeping It Open.