Vehicle recall defect – The Defect Involved Resulted From A Broken Drill Bit Protruding 0.15 Inch In The Mold Which Penetrated The Cured Tires To The Ply Cord In The Sidewall Area. Tires Will Not Leak Air But Moisture And Dirt May Enter The Hole And Cause Failure.
Vehicle recall defect – An Insufficient Cure Condition In The Bead Wire Rubber Insulation Was Caused By A Small Amount Of Contaminated Rubber.
Vehicle recall defect – Failure To Comply With Fmvss 109. Separation Between The Steel Belts And The Read. Consequence Of Defect: Tires That Fail To Meet The MinimUM Fmvss Requirements May Experience Sudden Loss Of Air Causing The Operator To Lose Control Of The Vehicle Which Could Result In An Accident.
Vehicle recall defect – An Insufficient Cure Condition In The Bead Wire Rubber Insulation Was Caused By A Small Amount Of Contaminated Rubber.
Vehicle recall defect – An Insufficient Cure Condition In The Bead Wire Rubber Insulation Was Caused By A Small Amount Of Contaminated Rubber.
Vehicle recall defect – An Insufficient Cure Condition In The Bead Wire Rubber Insulation Was Caused By A Small Amount Of Contaminated Rubber.
Vehicle recall defect – An Insufficient Cure Condition In The Bead Wire Rubber Insulation Was Caused By A Small Amount Of Contaminated Rubber.
Vehicle recall defect – An Insufficient Cure Condition In The Bead Wire Rubber Insulation Was Caused By A Small Amount Of Contaminated Rubber.
Vehicle recall defect – An Insufficient Cure Condition In The Bead Wire Rubber Insulation Was Caused By A Small Amount Of Contaminated Rubber.
Vehicle recall defect – An Insufficient Cure Condition In The Bead Wire Rubber Insulation Was Caused By A Small Amount Of Contaminated Rubber.