Vehicle recall defect – The Push Pull Headlight Switch May Have Electrical Contacts Which Allow An Intermittent Headlight Circuit Causing Headlight To Flicker Or Suddenly Go Out. Consequence Of Defect: Sudden Loss Of The Headlights Under Severe Weather Or Nighttime Driving Conditions Could Reduce Driver Visibility Which Might Result In A Vehicle Crash Without Prior Warning.
Vehicle recall defect – The Fan Blade, When Subjected To High Stress Levels, Can Fatigue And Break Apart At The Hub While The Engine Is Running. Consequence Of Defect: If Breakage Occurs While Hood Is Open, A Person Working Under The Hood Or Near The Truck Could Be Struck By A Blade Part And Be Injured.
Vehicle recall defect – Due To A Manufacturing Problem With The Fuel Tank Filler Pipe, The Fuel Cap May Improperly Seal The End Of The Filler Pipe. This Fails To Conform To The Requirements Of Federal Motor Vehicle Safety Standard 301, “Fuel System Integrity.” In The Event Of A Collision, An Improperly Sealed Filler Pipe Could Allow Fuel Spillage.
Vehicle recall defect – The Fan Blade, When Subjected To High Stress Levels, Can Fatigue And Break Apart At The Hub While The Engine Is Running. Consequence Of Defect: If Breakage Occurs While Hood Is Open, A Person Working Under The Hood Or Near The Truck Could Be Struck By A Blade Part And Be Injured.
Vehicle recall defect – The Fan Blade, When Subjected To High Stress Levels, Can Fatigue And Break Apart At The Hub While The Engine Is Running. Consequence Of Defect: If Breakage Occurs While Hood Is Open, A Person Working Under The Hood Or Near The Truck Could Be Struck By A Blade Part And Be Injured.
Vehicle recall defect – The Fuel Tank Fusible Bushing Element May Have Melted Due To Extremely High Temperatures Encountered When The Tanks Were Exposed To Direct Sunlight Rays During Chassis Storage.
Vehicle recall defect – The Involved Vehicles Do Not Have A Brake Fluid Reservoir Warning Which States, “Warning, Clean Filler Cap Before Removing. Use Only Dot 3 Fluid From A Sealed Container”. This Constitutes A Non-Compliance To Federal Motor Vehicle Safety Standard No. 105, “Hydraulic Brake Systems”.
Vehicle recall defect – The Parking Brake Switch Connector Contains Electrical Wires That May Be Reversed. As A Result, The Lamp Will Be Activated Whenever The Ignition Is Turned On, Even Though The Parking Brake Is Not Engaged. This Constitutes A Non-Compliance To Federal Motor Vehicle Safety Standard No. 105, “Hydraulic Brake Systems”. The Standard Requires That The Indicator Lamp Be Activated Upon Application Of The Parking Brake.
Vehicle recall defect – Seat Pedestals For Driver And Passengers May Have A Larger Than Specified Slot In The Center Channel.
Vehicle recall defect – Seat Pedestals For Driver And Passengers May Have A Larger Than Specified Slot In The Center Channel.