skyhawk

Vehicle recall defect – Possible Fuel Leakage Could Occur At The Throttle Body InjeCTIon Fuel Feed Pipe ConneCTIon On The Involved Vehicles.

Vehicle recall defect – Certain Replacement Fuel Filters, Fram Brand Name P/N G3727, With Date Codes X52911 Through X60801 Sequentially Or X600141 And A Mexico Country Or Origin Marking On The Fuel Filter Housing Manufactured From October 18, 2005, Through March 21, 2006, Sold For Use On The Vehicles Listed Above And On Certain School Buses. (To See The School Bus Engine Sizes, Click On “Document Search” And Then “Bus Applications”). The Connector On The Fuel Filter Was Not Manufactured To Honeywell’S Specification. As A Result, The O-Ring May Not Seat Correctly On The Fuel Line.

Vehicle recall defect – Under Certaain Conditions, The Hose Clamps On The Fuel Tank Filler Pipe And Fuel Tank Filler Vent Pipe Could Fracture. The Fracture Of These Clamps Could Cause Fuel Leakage At Any Of The Four Pipe To Hose ConneCTIons. Leakage Can Occur During Refueling, Or While Driving, If The Fuel Tank Is Above 3/4 Full.

Vehicle recall defect – Certain Replacement Fuel Filters, Fram Brand Name P/N G3727, With Date Codes X52911 Through X60801 Sequentially Or X600141 And A Mexico Country Or Origin Marking On The Fuel Filter Housing Manufactured From October 18, 2005, Through March 21, 2006, Sold For Use On The Vehicles Listed Above And On Certain School Buses. (To See The School Bus Engine Sizes, Click On “Document Search” And Then “Bus Applications”). The Connector On The Fuel Filter Was Not Manufactured To Honeywell’S Specification. As A Result, The O-Ring May Not Seat Correctly On The Fuel Line.

Vehicle recall defect – The Carburetor Fuel Feed Hose May Not Have Been Properly Positioned During Assembly. As A Result The Hose Could Come In Contact With Or Be Too Close To The Engine Emission Exhaust System Gas Recirculation Valve. This Can Cause The Hose To Rupture.

Vehicle recall defect – The Intermediate Shaft Coupling On The Involved Vehicles May Have Been Machined Oversized In The Serration Area Where It Attaches To The Steering Column. This Would Prevent The Coupling From Properly Tightening On The Shaft When The Clamp And Pinch Bolt Were Installed.

Vehicle recall defect –

Vehicle recall defect –

Vehicle recall defect – Under Certain Driving Conditions, Including Extended Severe Braking, The Wheel Bearing Area May Encounter Temperatures That Can Cause The Grease To Migrate Out Of The Bearing Area. This Will Reduce The Amount Of Lubrication Available To The Bearings And Result In Front Wheel Bearing Failure And Spindle Damage.

Vehicle recall defect –