Vehicle recall defect – On Certain Vehicles, The Sensotronic Brake Control (Sbc) System May Prematurely Shift To The Hydraulic Back-Up FunCTIon Mode, Due To Deterioration Of The Wiring Harness ConneCTIon, Or Due To Premature Failure Of The Hydraulic Pump.
Vehicle recall defect – On Certain Vehicles, The Electronic Monitoring System Of The Sensotronic Brake Control (Sbc) Is Designed To Monitor The Pressure Gradient Within The High Pressure Line Of The Brake System. If An Unacceptable Pressure Gradient Is Detected, The System Will Switch, As It Is Designed To Do, Into The Hydraulic FunCTIon Mode.
Vehicle recall defect – Vehicle Description: Passenger Vehicles. Corrosion Of The Electrical Ignition Filament Of The Air Bag Gas Generator Module Can Occur If The Vehicle Is Operated In Areas Of Frequently High Humidity.
Vehicle recall defect – Sabersport Is Recalling 16,270 Combination Corner And Bumper Lamp Assemblies Of Various Part Numbers Sold For Use As Aftermarket Equipment For Various Passenger Vehicles. These Headlamps Fail To Conform To The Requirements Of Federal Motor Vehicle Safety Standard No. 108, “Lamps, RefleCTIve Devices, And Associated Equipment.” These Lamps Do Not Contain The Required Amber Side Reflectors.
Vehicle recall defect – If One Of The Headlamp Wiper Arms Becomes Misaligned, The Wiper Balde Can Lodge In The Groove Under The Headlamp. If The Washers Are Activated With The Wiper Blade In The Misaligned And Lodged Position, The Washer Pump Will Run Continuously Expelling All Available Fluid.
Vehicle recall defect – The Drive Belt Pulley On The Engine Can Develop Fatigue Cracks In The Metal And Break. If The Drive Pulley Breaks, The Car Would Not Have Engine Cooling, Battery Charging, And/Or Power Steering.
Vehicle recall defect – Sabersport Is Recalling 16,270 Combination Corner And Bumper Lamp Assemblies Of Various Part Numbers Sold For Use As Aftermarket Equipment For Various Passenger Vehicles. These Headlamps Fail To Conform To The Requirements Of Federal Motor Vehicle Safety Standard No. 108, “Lamps, RefleCTIve Devices, And Associated Equipment.” These Lamps Do Not Contain The Required Amber Side Reflectors.
Vehicle recall defect – On Certain Vehicles, The Electronic Monitoring System Of The Sensotronic Brake Control (Sbc) Is Designed To Monitor The Pressure Gradient Within The High Pressure Line Of The Brake System. If An Unacceptable Pressure Gradient Is Detected, The System Will Switch, As It Is Designed To Do, Into The Hydraulic FunCTIon Mode.
Vehicle recall defect – Mercedes-Benz Is Recalling My 2006-2008 M-Class, R-Class, My 2005-2009 Slk-Class, My 2005-2008 C-Class, My 2003-2004 And 2006-2008 Clk-Class, My 2003-2008 E-Class, My 2004 And 2008 Cl-Class, My 2008 Cls-Class, My 2004 And 2007-2008 S-Class, My 2003 G-Class, And My 2003-2004, 2006 And 2009 Sl-Class Vehicles. A Software Calibration Number (Scn) Coding Received On The Affected Vehicles During A Recent Workshop Visit Was Incorrect. Depending On The Model Year And Model Affected, The Results Of An Incorrect Scn Coding Can Affect A Number Of Vehicle Safety And Emission FunCTIons Including The Following Types Of FunCTIons: (1) The Fuel Gauge Readings May Be Incorrect; (2) A Stuck Fuel-Level Sensor May Not Be Displayed In The Instrument Cluster; (3) The Obd System May Cause The Check Engine Light To Illuminate Incorrectly; And, (4) The Speedometer May Be Out Of Tolerance.
Vehicle recall defect – Mercedes-Benz Is Recalling Certain Model Year 2013 Sl-Class Vehicles Manufactured From December 19, 2011, Through May 31, 2012 Originally Equipped With R1234Yf Refrigerant. Daimler Ag (Dag), The Parent Company Of Mercedes-Benz, Conducted Product Testing Of A Vehicle, Not Sold In The Us, But Equipped With The Same Refrigerant. According To Mercedes-Benz, The Testing Was Designed To Replicate Worst-Case Conditions Expected In A Severe Frontal Crash That Would Cause A Rupture Of The Air Conditioner Refrigerant Line. A Rupture Of A Refrigerant Line Will Result In A Gaseous Mixture Of Refrigerant Being Released Into The Engine Compartment.