Vehicle recall defect – Equipment Description: Certain 2000 And Possible 2001 Model Year Trucks Equipped With Chalmers Suspensions Shipped May 8, 2000, To June 9, 2000, And September 19, 2000, To October 6, 2000. These Vehicles May Have DefeCTIve Fixed Fabricated Torque Rods Which Could Cause Lack Of Axle Retention.
Vehicle recall defect – Equipment Description: Explorer Procomp Upper Control / A-Arm Kits (Suspension Parts) Manufactured Between August 1, 2000, And March 15, 2002, Part Nos. 6110 And 6210, For Use As Aftermarket Suspension Kits For Moderate To Heavy Off Road Use For General Motors And Ford Light Truck Vehicles. The Corner Of The Ball Joint Mounting Plate In The Control / A-Arm Assembly May Crack Or Fracture.
Vehicle recall defect – On Certain 16-Tire Lowbed Trailers Equipped With Cast Axle Hangers, A Crack Could Develop If The Loaded Trailers Struck Obstacles Or Road Hazards With Sufficient Force.
Vehicle recall defect – On Certain 16-Tire Lowbed Trailers Equipped With Cast Axle Hangers, A Crack Could Develop If The Loaded Trailers Struck Obstacles Or Road Hazards With Sufficient Force.
Vehicle recall defect – The Left Or Right Front Tag Hanger Assembly Can Develop A Metal Fatigue Problem Where The Journal Tube Is Welded To The Frame Mounting Plate. Cracks Through The Frame Mounting Plate May Begin Around The Journal Tube And Propagate Up The Supporting Gusset.
Vehicle recall defect – The Left Or Right Front Tag Hanger Assembly Can Develop A Metal Fatigue Problem Where The Journal Tube Is Welded To The Frame Mounting Plate. Cracks Through The Frame Mounting Plate May Begin Around The Journal Tube And Propagate Up The Supporting Gusset.
Vehicle recall defect – The Equalizing Beam Shaft Of The Tandem Axle Suspension Were Manufactured From As-Rolled Sae4140 Steel Rather Than The Specified Annealed Sae4140. These Shafts Can Fracture Inside The Beam At The Toe Of The Weld.
Vehicle recall defect – Equipment Description: Aftermarket Control Arms For Use On 1967-1973 Ford Mustang Vehicles. The Control Arms Used On Ford Fairlane Vehicles Were Shipped With Ones Intended For Use On The Ford Mustang. The Control Arms Are Different In Length.
Vehicle recall defect – Equipment Description: Aftermarket Control Arms For Use On 1967-1973 Ford Mustang Vehicles. The Control Arms Used On Ford Fairlane Vehicles Were Shipped With Ones Intended For Use On The Ford Mustang. The Control Arms Are Different In Length.