Vehicle recall defect – Temsa Global Is Recalling Certain Model Year 2007-2013 Ts35C And Model Year 2012-2013 Ts30 Coach Buses. The Label Indicating The Nearest Emergency Exit Window Release Mechanism May Be Missing. Thus, These Buses Fail To Conform With Federal Motor Vehicle Safety Standard No. 217, “Bus Emergency Exits And Window Retention And Release.”
Vehicle recall defect – Temsa Global Is Recalling Certain Model Year 2011-2013 Ts35C Motorcoach Buses Manufactured November 2010 Through May 2013 And 2012-2013 Ts30 Motorcoach Buses Manufactured November 2011 Through April 2013 And Equipped With 3-Point Seat Belts. The Bolts Used For The Installation Of The Seat Were Tighted Over Their Torque Specification Which May Cause The Bolts To Fail.
Vehicle recall defect – Temsa Global Is Recalling Certain Model Year 2011-2013 Ts35C And 2012-2013 Ts30 Motor Coach Buses. First, The Two Service Air Brake Pressure Gauges Are Both Reading The Pressure Of The Same Air Tank. Second, The Abs System MalfunCTIon Indicator Light Does Not Illuminate Momentarily When The Key Is Turned To The ‘On’ Or ‘Run’ Position. Thus, These Vehicles Fail To Comply With Federal Motor Vehicle Safety Standard No. 121, “Air Brake Systems.”
Vehicle recall defect – Temsa Global Is Recalling Certain Model Year 2012-2013 Ts30 Motorcoaches Manufactured From November 2011, Through December 2012. When The Vehicle Is Put In The “Body Lift” Position, The Brake Hoses Near The Front Tires Become Stretched.
Vehicle recall defect – Temsa Global Is Recalling Certain Model Year 2007-2013 Ts35C And Model Year 2012-2013 Ts30 Coach Buses. The Label Indicating The Nearest Emergency Exit Window Release Mechanism May Be Missing. Thus, These Buses Fail To Conform With Federal Motor Vehicle Safety Standard No. 217, “Bus Emergency Exits And Window Retention And Release.”
Vehicle recall defect – Temsa Global Is Recalling Certain Model Year 2011-2013 Ts35C Motorcoach Buses Manufactured November 2010 Through May 2013 And 2012-2013 Ts30 Motorcoach Buses Manufactured November 2011 Through April 2013 And Equipped With 3-Point Seat Belts. The Bolts Used For The Installation Of The Seat Were Tighted Over Their Torque Specification Which May Cause The Bolts To Fail.
Vehicle recall defect – Temsa Global (Temsa) Is Recalling Certain Model Year 2007-2012 Ts35 Buses For Failing To Comply With The Requirements Of Federal Motor Vehicle Safety Standard No. 217, Øbus Emergency Exits And Window Retention And Release.Ø Some Of The Emergency Exit Mechanism InstruCTIon Labels May Have Been Installed Farther Than 16 Cm From The Release Mechanism.
Vehicle recall defect – Temsa Global Is Recalling Certain Model Year 2011-2013 Ts35C And 2012-2013 Ts30 Motor Coach Buses. First, The Two Service Air Brake Pressure Gauges Are Both Reading The Pressure Of The Same Air Tank. Second, The Abs System MalfunCTIon Indicator Light Does Not Illuminate Momentarily When The Key Is Turned To The ‘On’ Or ‘Run’ Position. Thus, These Vehicles Fail To Comply With Federal Motor Vehicle Safety Standard No. 121, “Air Brake Systems.”
Vehicle recall defect – Temsa Global Is Recalling Certain Model Year 2007-2010 Ts35 Buses For Failing To Comply With The Requirements Of Federal Motor Vehicle Safety Standard No. 217, “Bus Emergency Exits And Window Retention And Release.” The Buses May Have One Too Few Emergency Exits On Each Side Of The Bus For The Number Of Seats That The Bus Is Equipped With.
Vehicle recall defect – Temsa Global Is Recalling Certain Model Year 2012-2013 Ts30 Motorcoaches Manufactured From November 2011, Through December 2012. When The Vehicle Is Put In The “Body Lift” Position, The Brake Hoses Near The Front Tires Become Stretched.