Vehicle recall defect – This Is Not A Safety Recall In Accordance With The Safety Act. However, It Is Deemed A Safety Improvement Campaign By The Agency. Vehicle Description: Minivans Equipped With Front Bucket Seats. The Front Seat Recliner Mechanism Lower Bolts Can Loosen. A Loose Bolt Could Fatigue And Break, Resulting In The Seat Back Falling Rearward.
Vehicle recall defect – Vehicle Description: Passenger Vehicles And Mini Vans Originally Sold Or Currently Registered In The Following States: ConneCTIcut, Illinois, Indiana, Maine, Massachusetts, Michigan, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont And Wisconsin. The Rear Cradle Bolts Pull Through The Retainers Due To Corrosion Of The Retainer. If Both Bolts Pull Through, The Rear Cradle Would Not Longer Be Supported At These Mounting Locations And The Steering Intermediate Shaft Can Separate From The Steering Gear.
Vehicle recall defect – The Glove Compartment Door Will Not Remain Closed During Certain Load Forces Associated With A Vehicle Crash. This Does Not Comply With The Requirements Of Fmvss 201.
Vehicle recall defect – This Is Not A Safety Recall In Accordance With The Safety Act. However, It Is Deemed A Safety Improvement Campaign By The Agency. Vehicle Description: Minivans Equipped With Front Bucket Seats. The Front Seat Recliner Mechanism Lower Bolts Can Loosen. A Loose Bolt Could Fatigue And Break, Resulting In The Seat Back Falling Rearward.
Vehicle recall defect – Vehicle Description: Passenger Vehicles Manufactured From August 1991 Through July 1995. The Transmission Oil Cooler Line Can Separate When The Vehicle Is Operated In Low Temperatures In Combination With High Transmission Loads.
Vehicle recall defect – Vehicle Description: Passenger Vehicles And Mini Vans Originally Sold Or Currently Registered In The Following States: ConneCTIcut, Illinois, Indiana, Maine, Massachusetts, Michigan, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont And Wisconsin. The Rear Cradle Bolts Pull Through The Retainers Due To Corrosion Of The Retainer. If Both Bolts Pull Through, The Rear Cradle Would Not Longer Be Supported At These Mounting Locations And The Steering Intermediate Shaft Can Separate From The Steering Gear.
Vehicle recall defect – These Vehicles Were Assembled With Throttle Cable Support Brackets That Could Contact The Throttle Lever System And Inhibit The Throttle Return. This Does Not Meet The Requirements Of Fmvss No. 124, “Accelerator Control Systems.”
Vehicle recall defect – The Glove Compartment Door Will Not Remain Closed During Certain Load Forces Associated With A Vehicle Crash. This Does Not Comply With The Requirements Of Fmvss 201.
Vehicle recall defect – Improperly Manufactured Brake Pedal Arm Causes The Brake Pedal Arm To Fracture During Braking.
Vehicle recall defect – A Right Hand Seat/Shoulder Belt Retractor May Have Been Installed In The Second Row Left Hand Seat Position (Directly Behind Driver).