Mack U Series (1980) – 82V019000
Vehicle recall defect – Certain Vehicles May Be Subject To Steering Shaft Separation Due To Loose Set Screws In The Dash Sheet Bearing Which May Allow The Shaft To Move.
Mack U Series (1980) – 81V088000
Vehicle recall defect – The Retaining Pin For The Brake Control Knob Has Been Misaligned (Off The Center Line Of The Valve Plunger Hole). This Causes The Knob To Be Overstressed At The Retaining Pin Hole Area Causing It To Separate From The Valve.
Mack U Series (1980) – 80V054000
Vehicle recall defect – The Prefabricated Pinch Bolt Clamp At The Lower Steering Shaft Lower Yoke May Not Perform Adequately When Tightened To Specifications. The Clamp May Then Deform And Loss Of ClaMPIng Force And Steering Shaft Disengagement May Result.
Mack U Series (1980) – 80V052000
Vehicle recall defect – On Certain Vehicles, The Knob That Operates The Tractor Park Valve May Break Off, Rendering The Valve Inoperable.
Mack U Series (1979) – 81V088000
Vehicle recall defect – The Retaining Pin For The Brake Control Knob Has Been Misaligned (Off The Center Line Of The Valve Plunger Hole). This Causes The Knob To Be Overstressed At The Retaining Pin Hole Area Causing It To Separate From The Valve.
Mack U Series (1979) – 80V054000
Vehicle recall defect – The Prefabricated Pinch Bolt Clamp At The Lower Steering Shaft Lower Yoke May Not Perform Adequately When Tightened To Specifications. The Clamp May Then Deform And Loss Of ClaMPIng Force And Steering Shaft Disengagement May Result.
Mack U Series (1979) – 80V052000
Vehicle recall defect – On Certain Vehicles, The Knob That Operates The Tractor Park Valve May Break Off, Rendering The Valve Inoperable.
Mack U Series (1978) – 80V054000
Vehicle recall defect – The Prefabricated Pinch Bolt Clamp At The Lower Steering Shaft Lower Yoke May Not Perform Adequately When Tightened To Specifications. The Clamp May Then Deform And Loss Of ClaMPIng Force And Steering Shaft Disengagement May Result.
Mack U Series (1977) – 80V054000
Vehicle recall defect – The Prefabricated Pinch Bolt Clamp At The Lower Steering Shaft Lower Yoke May Not Perform Adequately When Tightened To Specifications. The Clamp May Then Deform And Loss Of ClaMPIng Force And Steering Shaft Disengagement May Result.
Mack U Series (1976) – 80V054000
Vehicle recall defect – The Prefabricated Pinch Bolt Clamp At The Lower Steering Shaft Lower Yoke May Not Perform Adequately When Tightened To Specifications. The Clamp May Then Deform And Loss Of ClaMPIng Force And Steering Shaft Disengagement May Result.