vanagon

Vehicle recall defect – Usage Of Fuel With Reid Pressure Up To 14 Psi Could, Under High Engine Load And High Ambient Temperatures, Lead To Stalling.

Vehicle recall defect – Fuel Tank Filler Neck Pipe May Not Seat Properly In The Fuel Tank Opening. Also, The Sending Unit Cover May Be Deformed.

Vehicle recall defect – The Latch Of The Passenger Side Sliding Door May Become Damaged If Excessive Force Is Used To Close The Door. The Damaged Door Lock Mechanism Will Not Properly Engage And The Door Could Open If Vehicle Is Driven Over Bumpy Roads. Consequence Of Defect: If This Occurs There Is A Possibility That A Passenger Could Fall Out Causing Injury Or Death.

Vehicle recall defect – Spring, Which Holds The Latch On The Front Door Locks, May Break And Door May Open Unexpectedly.

Vehicle recall defect – Spring, Which Holds The Latch On The Front Door Locks, May Break And Door May Open Unexpectedly.

Vehicle recall defect – During Vehicle Operation, The Pop Top Could Loosen From Its Anchor Due To Wind Pressure. It Could Open And Separate Entirely From The Vehicle.

Vehicle recall defect – During Vehicle Operation, The Pop Top Could Loosen From Its Anchor Due To Wind Pressure. It Could Open And Separate Entirely From The Vehicle.

Vehicle recall defect – The Auxiliary Heater”S Exhaust Pipe Is Mounted In A Downward Position Toward The Ground.

Vehicle recall defect – The Bolts Which Attach Each Left And Right Side Front Ball Joint To The Upper Wishbone, May Not Have Been Sufficiently Tightened During Assembly. This Could Cause The Ball Joint To Separate From The Wishbone.

Vehicle recall defect – Pin In Shift Locking Pawl May Not Be Properly Welded To The Pawl.