525

Vehicle recall defect – BMW Of North America, Llc (BMW) Is Recalling Certain 2000-2002 BMW 320I, 323I, 325I, 325Xi, 330I, 330Xi, 323Ci, 325Ci, 330Ci, M3, 323It, 325It And 325Xit Vehicles, 2001-2002 525I, 530I, 540I, M5, 525It And 540It Vehicles, And 2001-2003 X5 3.0I, X5 4.4I, And X5 4.6Is Vehicles. These Vehicles May Have Had A Driver-Side Air Bag Module Installed As Replacement Equipment Such As After A Vehicle Crash Necessitating Replacement Of The Original Air Bag, Or As A Remedy Part For A Prior Recall. These Replacement Modules Contain An Air Bag Inflator That May Rupture Due To Propellant Degradation Occurring After Long-Term Exposure To Lower Absolute Humidity, Temperature And Temperature Cycling.

Vehicle recall defect – BMW Of North America, Llc (BMW) Is Recalling Certain 2000-2002 BMW 320I, 323I, 325I, 325Xi, 330I, 330Xi, 323Ci, 325Ci, 330Ci, M3, 323It, 325It And 325Xit Vehicles, 2001-2002 525I, 530I, 540I, M5, 525It And 540It Vehicles, And 2001-2003 X5 3.0I, X5 4.4I, And X5 4.6Is Vehicles. These Vehicles May Have Had A Driver-Side Air Bag Module Installed As Replacement Equipment Such As After A Vehicle Crash Necessitating Replacement Of The Original Air Bag, Or As A Remedy Part For A Prior Recall. These Replacement Modules Contain An Air Bag Inflator That May Rupture Due To Propellant Degradation Occurring After Long-Term Exposure To Lower Absolute Humidity, Temperature And Temperature Cycling.

Vehicle recall defect – Feed Fuel Hoses Can Harden And “Set” Over Time, Allowing A Seepage Of Fuel At The ConneCTIon Between The Hose And The Engine Fitting. The Clamp Used To Hold The Hose To The Fitting Is Unable To Compensate For The Hardening Of The Feed Fuel Hose.

Vehicle recall defect – Feed Fuel Hoses Can Harden And “Set” Over Time, Allowing A Seepage Of Fuel At The ConneCTIon Between The Hose And The Engine Fitting. The Clamp Used To Hold The Hose To The Fitting Is Unable To Compensate For The Hardening Of The Feed Fuel Hose.

Vehicle recall defect – Feed Fuel Hoses Can Harden And “Set” Over Time, Allowing A Seepage Of Fuel At The ConneCTIon Between The Hose And The Engine Fitting. The Clamp Used To Hold The Hose To The Fitting Is Unable To Compensate For The Hardening Of The Feed Fuel Hose.

Vehicle recall defect – Insufficient Axial Clearance Exists For Throttle Valve, Shaft, And Housing Due To The Different Thermal Expansion Rates Of The Separate Parts When Vehicle Reaches Normal Operating Temperatures And Ambient Temperature Is 40 Degrees Fahrenheit Or Less.

Vehicle recall defect – Feed Fuel Hoses Can Harden And “Set” Over Time, Allowing A Seepage Of Fuel At The ConneCTIon Between The Hose And The Engine Fitting. The Clamp Used To Hold The Hose To The Fitting Is Unable To Compensate For The Hardening Of The Feed Fuel Hose.

Vehicle recall defect – Under Certain Conditions, Front Seat Center, Fold-Down Arm Rest May Contact The Safety Belt Buckle, Causing Damage To The Release Button And Preventing The Belt Tongue From Latching When Buckling Up.

Vehicle recall defect – Feed Fuel Hoses Can Harden And “Set” Over Time, Allowing A Seepage Of Fuel At The ConneCTIon Between The Hose And The Engine Fitting. The Clamp Used To Hold The Hose To The Fitting Is Unable To Compensate For The Hardening Of The Feed Fuel Hose.

Vehicle recall defect – The 80-Ampere Fusible Link Located In The Engine Compartment Can Develop Mechanical Weakness Due To Aging And Thermal Stresses, And Can Break.