535

Vehicle recall defect – Brake Light Switch Could Overheat, Eventually Leading To Melting Of Plastic Internal Parts In Area Of Electrical Contacts.

Vehicle recall defect – Brake Light Switch Could Overheat, Eventually Leading To Melting Of Plastic Internal Parts In Area Of Electrical Contacts.

Vehicle recall defect – Under Certain Conditions, Front Seat Center, Fold-Down Arm Rest May Contact The Safety Belt Buckle, Causing Damage To The Release Button And Preventing The Belt Tongue From Latching When Buckling Up.

Vehicle recall defect – Feed Fuel Hoses Can Harden And “Set” Over Time, Allowing A Seepage Of Fuel At The ConneCTIon Between The Hose And The Engine Fitting. The Clamp Used To Hold The Hose To The Fitting Is Unable To Compensate For The Hardening Of The Feed Fuel Hose.

Vehicle recall defect – Under Certain Conditions, Front Seat Center, Fold-Down Arm Rest May Contact The Safety Belt Buckle, Causing Damage To The Release Button And Preventing The Belt Tongue From Latching When Buckling Up.

Vehicle recall defect – Feed Fuel Hoses Can Harden And “Set” Over Time, Allowing A Seepage Of Fuel At The ConneCTIon Between The Hose And The Engine Fitting. The Clamp Used To Hold The Hose To The Fitting Is Unable To Compensate For The Hardening Of The Feed Fuel Hose.

Vehicle recall defect – Feed Fuel Hoses Can Harden And “Set” Over Time, Allowing A Seepage Of Fuel At The ConneCTIon Between The Hose And The Engine Fitting. The Clamp Used To Hold The Hose To The Fitting Is Unable To Compensate For The Hardening Of The Feed Fuel Hose.

Vehicle recall defect – Feed Fuel Hoses Can Harden And “Set” Over Time, Allowing A Seepage Of Fuel At The ConneCTIon Between The Hose And The Engine Fitting. The Clamp Used To Hold The Hose To The Fitting Is Unable To Compensate For The Hardening Of The Feed Fuel Hose.

Vehicle recall defect – Some Of These Vehicles Are Equipped With A Throttle Housing On Which The Throttle Valve Shaft Retaining Nut Was Not Sufficiently Tightened.

Vehicle recall defect – Feed Fuel Hoses Can Harden And “Set” Over Time, Allowing A Seepage Of Fuel At The ConneCTIon Between The Hose And The Engine Fitting. The Clamp Used To Hold The Hose To The Fitting Is Unable To Compensate For The Hardening Of The Feed Fuel Hose.