drag link assembly Archives

Mopar Drag Link Assembly – 20E043000

Vehicle recall defect – Chrysler (FCA Us Llc) Is Recalling Certain Mopar Steering 4X4 Drag Link Assemblies (Part Number 68369907Aa), And The Associated Components, Jam Nuts (Part Numbers 06510749Aa And 06510750Aa), Drag Link Inner (Part Number 68111304Aa), Drag Link Outer (68111301Aa), And Drag Link Adjuster (Part Number 68111302Aa) Sold For Replacement Use On Heavy Duty Ram 2500 And 3500 Trucks. The Outboard Steering Linkage Jam Nut May Loosen, Allowing One End Of The Drag Link To Separate. The Drag Link Assemblies May Have Been Installed As Part Of A Vehicle Repair; The Drag Link Assemblies Installed During Vehicle Manufacturing Were Subject To Nhtsa Safety Recall 19V-021.

Mopar Drag Link Assembly – 20E043000

TRW Drag Link Assembly – 00E047007

Vehicle recall defect – Equipment Description: Tie Rod Assemblies Manufactured By TRW. The Suspect Tie Rods Contain 20 Edl Model Ball Sockets. Certain Of The Tie Rod Ball-Socket Bearings Have A Below Specification Case Depth And/Or Hardness Which Can Lead To Premature Deterioration Of The Socket. These Bearings Were Produced Between July 5 And October 3, 1999.

TRW Drag Link Assembly – 00E047002

Vehicle recall defect – Equipment Description: Drag Link Assemblies Manufactured By TRW. Each Drag Link Assembly Contains Two 20-Edl Model Ball Socket Assemblies. Certain Of The Ball-Socket Bearings Have A Below Specification Case Depth And/Or Hardness Which Can Lead To Premature Deterioration Of The Socket. These Bearings Were Produced Between July 5 And October 3, 1999.

TRW Drag Link Assembly – 04E003000

Vehicle recall defect – Replacement Clamp Assemblies And Drag Link Assemblies That Contain A Potentially DefeCTIve 5/8-11-Grade B Prevailing Torque Hex Nut Manufactured Between November 14 And December 12, 2003. If The Final Tightening Of The 5/8-11-Grade B Prevailing Torque Hex Nut Is Less Than 65 Lb.-Ft, The Clamp Load Would Be Unacceptably Low And Could Compromise The Integrity Of The Drag Link To The Point Where The Ball Socket Could Separate From The Drag Link Causing Loss Of Steering Control.

TRW Drag Link Assembly – 00E047008

Vehicle recall defect – Equipment Description: Ball Socket Assemblies Sold For Use As Service Or Aftermarket Parts. Certain Of The Ball-Socket Bearings Have A Below Specification Case Depth And/Or Hardness Which Can Lead To Premature Deterioration Of The Socket. These Bearings Were Produced Between July 5 And October 3, 1999.