Vehicle recall defect – Equipment Description: Drag Link Assemblies Manufactured By TRW. Each Drag Link Assembly Contains Two 20-Edl Model Ball Socket Assemblies. Certain Of The Ball-Socket Bearings Have A Below Specification Case Depth And/Or Hardness Which Can Lead To Premature Deterioration Of The Socket. These Bearings Were Produced Between July 5 And October 3, 1999.
Vehicle recall defect – Rear Of Plastic Shell May Crack Or Shear Allowing The Shoulder Harness To Loosen And Occupant To Fall Forward More Than The Distance Permitted By Federal Motor Vehicle Safety Standard No. 213, Child Restraint Systems.
Vehicle recall defect – TRW Automotive Inc (TRW) Has Submitted A Defect Information Report Based Upon Decisions Made By Volkswagen Group Of America, Inc., Fiat Chrysler Usa, BMW Of North America, Llc And Mercedes-Benz To Conduct Recalls To Inspect, And Bleed The Front And/Or Rear Brake System, Due To The Brake Caliper Pistons Having An Insufficient Coating.
Vehicle recall defect – Equipment Description: Ball Socket Assemblies Sold For Use As Service Or Aftermarket Parts. Certain Of The Ball-Socket Bearings Have A Below Specification Case Depth And/Or Hardness Which Can Lead To Premature Deterioration Of The Socket. These Bearings Were Produced Between July 5 And October 3, 1999.
Vehicle recall defect – Equipment Description: Tie Rod Assemblies Manufactured By TRW. The Suspect Tie Rods Contain 20 Edl Model Ball Sockets. Certain Of The Tie Rod Ball-Socket Bearings Have A Below Specification Case Depth And/Or Hardness Which Can Lead To Premature Deterioration Of The Socket. These Bearings Were Produced Between July 5 And October 3, 1999.
Vehicle recall defect – TRW Automotive Inc (TRW) Is Recalling Certain Aftermarket Replacement Ball Joints, Part Number Jbj343. These Ball Joints Have Attachments Nuts That Are The Incorrect Size, Possibly Causing A Loss Of Steering Control.
Vehicle recall defect – TRW Automotive Inc (TRW) Is Recalling Certain Aftermarket Replacement Left Hand And Right Hand Lower Ball Joints, Sold For Use On Toyota 4Runner, Sequioa And Tundra Vehicles. These Ball Joints Were Built Incorrectly With A Vented Dust Shield On The Ball Joint Stud, Which Could Allow Contamination To Enter The Joint, Possibly Causing Wear And Looseness.
Vehicle recall defect – TRW Automotive Inc. (TRW) Is Recalling Certain Air Bag Electronic Control Units (Ecu). These Ecus May MalfunCTIon, Possibly Disabling The Deployment Of The Air BAGS And/Or Seat Belt Pretensioners Or Causing Them To Unexpectedly Deploy.
Vehicle recall defect – Certain Aftermarket Eldorado Axle Assemblies Equipped With ARVInmeritor And TRW 20-Edl Ball Socket Assemblies. The Ball Sockets Have A Less Robust Bearing Design, Which Leads To Higher Wear Rates And More Rapid Wear-Out.
Vehicle recall defect – Federal Mogul Is Recalling 6,903 Aftermarket Ball Joint Assemblies Shipped Between November 9, 2007 And March 26, 2008, Which May Have Been Packaged With Incorrect Nuts. The Part Numbers Packaged With Incorrect Nuts Are: K7147, K7329, K8683, And 104353. These Parts Were Made For Use On The Various Vehicles Listed Above.