escort

Vehicle recall defect – On Certain Vehicles, The Right And Left Hand Rear Brake Backing Plate Attachment Bolts May Not Have Been Tightened To The Correct Specifications. Backing Plate Bolts May Not Be Able To Withstand The Loads Experienced During Truck Shipment. If The Bolts Loosen From The Spindle During Operation, Backing Plate Movement May Result In Weakening Or Premature Wear Of One Or Both Rear Brake Tubes. This Could Lead To Loss Of Brake Fluid.

Vehicle recall defect – Some Of The Involved Vehicles Were Produced With An Engine Compartment Wire Assembly That May Have Been Routed Above The Air Conditioning SuCTIon Hose. This Hose May Push Up On The Wiring Harness Causing It To Contact The Hood Prop Rod Bracket Attaching Bolt. This Could Lead To Penetration Or Chafing Of The Wiring Insulation.

Vehicle recall defect – On The Involved Vehicles, A Thermal Limiter In The Blower Motor Resistor Circuit Of The Air Conditioner/Heater Assembly May Not FunCTIon As Intended. If The Blower Motor Becomes Jammed When The System Is Operating In The Medium-Low Blower Speed, The Resistor Coils Can Overheat Causing Melting And Possible Ignition.

Vehicle recall defect – Screw That Connects The Seat Back Frame To The Recliner Mechanism May Break.

Vehicle recall defect – Seat Frame Structure Could Sever Front Seat Belts If Vehicle Is Involved In An Accident, Depending On Force Of Impact.

Vehicle recall defect – Door Lock Pillars Could Develop Fatigue Cracks From Normal Usage Of Door, At The Point Where Door Latch Striker Reinforcements Are Attached.