fl-70

Vehicle recall defect – The Windshield Wiper Arm Support Cracks Where The Wiper Arm Pivot Mounts To The Support Brackets Causing Failure Of The System.

Vehicle recall defect – A Number Of Cabs Were Assembled With Fewer Welds Than Specified In The Upper B Pillar Near The Anchorage For The Seat Belt. Welding Materials Used On The Inboard Anchorage Bracket Under The Cab Deck Will Not Meet Fmvss No. 210 Load Test Requirements When Three Seating Positions Are Provided.

Vehicle recall defect – Reservoir Interior Paint Was Allowed To Enter The Air Reservoir Check Valve, And The Valve Is Not Properly Seated.

Vehicle recall defect – The Hook Size Of The Throttle Return Spring Is Too Small Resulting In A Tight Fit Around The Anchor Nut, Causing The Throttle Return Spring To Break Prematurely.

Vehicle recall defect – The Windshield Wiper Arm Support Cracks Where The Wiper Arm Pivot Mounts To The Support Brackets Causing Failure Of The System.

Vehicle recall defect – As The Brake Pads Wear, The Brake Caliper Travel May Be Limited By Interference With The Main Support Member (Z-Bar Spring) Of The Suspension.

Vehicle recall defect – The Brake Chamber Mounting Studs Can Loosen Or Pull Through Due To Fatigue In The Brake Chamber Housing Caused By Foundation Brake Chatter.

Vehicle recall defect – A Number Of Cabs Were Assembled With Fewer Welds Than Specified In The Upper B Pillar Near The Anchorage For The Seat Belt. Welding Materials Used On The Inboard Anchorage Bracket Under The Cab Deck Will Not Meet Fmvss No. 210 Load Test Requirements When Three Seating Positions Are Provided.

Vehicle recall defect – Air System Blockage In The Air Dryer Occurs Degrading The Moisture Removing Capabilities Of The Dryer When The Vehicle Is Operated In A Cold Environment And Moisture Accumulates And Freezes In The Air Dryer Or In The Line Between The Dryer And The Air System Reservoir. The Air Dryer Can Become Over Pressurized Causing The Air Dryer Cartridge To Separate From The Mounting Base.

Vehicle recall defect – Vehicle Description: Heavy Duty Truck. The Shoulder Bolt Which Holds The Grote Turn Signal Switch Case And Components Together Can Loosen Resulting In The Turn Signal MalfunCTIoning.