Chevrolet K25 (1990) – 90V108000
Vehicle recall defect – Loose Pivot Bolt Holding The Brake Pedal To Its Support Bracket Could Disengage From The Nut.
Chevrolet K25 (1986) – 86V131000
Vehicle recall defect – The Push Pull Headlight Switch May Have Electrical Contacts Which Allow An Intermittent Headlight Circuit Causing Headlight To Flicker Or Suddenly Go Out. Consequence Of Defect: Sudden Loss Of The Headlights Under Severe Weather Or Nighttime Driving Conditions Could Reduce Driver Visibility Which Might Result In A Vehicle Crash Without Prior Warning.
GMC K25 (1990) – 93V119000
Vehicle recall defect – Severe Corrosion Due To Road Salt At The Joint Of The Stamped Steel Center SeCTIon And The Cast Outer SeCTIon Can Cause The SeCTIons To Separate.
GMC K25 (1990) – 90V108000
Vehicle recall defect – Loose Pivot Bolt Holding The Brake Pedal To Its Support Bracket Could Disengage From The Nut.
GMC K25 (1989) – 93V119000
Vehicle recall defect – Severe Corrosion Due To Road Salt At The Joint Of The Stamped Steel Center SeCTIon And The Cast Outer SeCTIon Can Cause The SeCTIons To Separate.
GMC K25 (1989) – 89V078000
Vehicle recall defect – There May Be Below Specified Torque On The Trailer Hitch Attaching Fasteners, Allowing The Trailer Hitch To Move Under Towing Loads.
GMC K25 (1988) – 93V119000
Vehicle recall defect – Severe Corrosion Due To Road Salt At The Joint Of The Stamped Steel Center SeCTIon And The Cast Outer SeCTIon Can Cause The SeCTIons To Separate.
GMC K25 (1988) – 87V128000
Vehicle recall defect – Incorrect Front Shock Absorber Upper And Lower Nuts Could Loosen.
GMC K25 (1988) – 87V127000
Vehicle recall defect – Trucks May Have Cracked Or Broken Door Striker Nuts, Which Do Not Conform To Fmvss 206.
GMC K25 (1988) – 87V126000
Vehicle recall defect – One Or Both Of Outer Tie Rod Nuts May Be Loose And Not Crimped.