mb-70

Vehicle recall defect – The Parking Brake Lever May Not Travel Far Enough Over Center To Assure That It Remains In The Proper Position Allowing The Vehicle To Roll Away While Parked.

Vehicle recall defect – The Brake Chamber Mounting Studs Can Loosen Or Pull Through Due To Fatigue In The Brake Chamber Housing Caused By Foundation Brake Chatter.

Vehicle recall defect – A Number Of Cabs Were Assembled With Fewer Welds Than Specified In The Upper B Pillar Near The Anchorage For The Seat Belt. Welding Materials Used On The Inboard Anchorage Bracket Under The Cab Deck Will Not Meet Fmvss No. 210 Load Test Requirements When Three Seating Positions Are Provided.

Vehicle recall defect – Air System Blockage In The Air Dryer Occurs Degrading The Moisture Removing Capabilities Of The Dryer When The Vehicle Is Operated In A Cold Environment And Moisture Accumulates And Freezes In The Air Dryer Or In The Line Between The Dryer And The Air System Reservoir. The Air Dryer Can Become Over Pressurized Causing The Air Dryer Cartridge To Separate From The Mounting Base.

Vehicle recall defect – The Parking Brake Lever May Not Travel Far Enough Over Center To Assure That It Remains In The Proper Position Allowing The Vehicle To Roll Away While Parked.

Vehicle recall defect – The Brake Chamber Mounting Studs Can Loosen Or Pull Through Due To Fatigue In The Brake Chamber Housing Caused By Foundation Brake Chatter.

Vehicle recall defect – A Number Of Cabs Were Assembled With Fewer Welds Than Specified In The Upper B Pillar Near The Anchorage For The Seat Belt. Welding Materials Used On The Inboard Anchorage Bracket Under The Cab Deck Will Not Meet Fmvss No. 210 Load Test Requirements When Three Seating Positions Are Provided.

Vehicle recall defect – Vehicle Description: Medium And Heavy Duty Trucks Chassis Equipped With Allison 500 Series Transmission And A Bendix 9X3 Power Apply Park Brake System. The Cam Lever Of The Powered Apply Brake Can Move Forward, Because A Hole In The Transmission Mounting Boss Was Drilled Too Deep.

Vehicle recall defect – Vehicle Description: Medium And Heavy Duty Trucks Chassis Equipped With Allison 500 Series Transmission And A Bendix 9X3 Power Apply Park Brake System. The Cam Lever Of The Powered Apply Brake Can Move Forward, Because A Hole In The Transmission Mounting Boss Was Drilled Too Deep.

Vehicle recall defect – The Parking Brake Lever May Not Travel Far Enough Over Center To Assure That It Remains In The Proper Position Allowing The Vehicle To Roll Away While Parked.