Mitsubishi Fuso Fe434 (1987) – 87V134000
Vehicle recall defect – Improper Machining Of The Clutch Master Cylinder Located On Clutch Pedal Support.
Vehicle recall defect – Improper Machining Of The Clutch Master Cylinder Located On Clutch Pedal Support.
Vehicle recall defect – On Certain Trucks,The Steering System Knuckle Arm Was Designed With An Insufficient Strength Margin. Repeated Steering Operation While Stationary, Or Normal Vehicle Operation That Requires Frequent Repeated Steering Operation, Could Cause The Knuckle Arm To Crack.
Vehicle recall defect – On Certain Trucks,The Steering System Knuckle Arm Was Designed With An Insufficient Strength Margin. Repeated Steering Operation While Stationary, Or Normal Vehicle Operation That Requires Frequent Repeated Steering Operation, Could Cause The Knuckle Arm To Crack.
Vehicle recall defect – Vehicle Description: 1994 Models Are Only In The State Of California. The Material Hardness Of The Parking Brake Ratchet Bar Was Greater Than That Of Its Mating Part, The Parking Pawl.
Vehicle recall defect – The Welded Joints ConneCTIng The Catalytic Converter Muffler And The Exhaust Pipe Was Inferior. The Weld Can Crack Under Normal Operation.
Vehicle recall defect – Vehicle Description: 1994 Models Are Only In The State Of California. The Material Hardness Of The Parking Brake Ratchet Bar Was Greater Than That Of Its Mating Part, The Parking Pawl.
Vehicle recall defect – The Welded Joints ConneCTIng The Catalytic Converter Muffler And The Exhaust Pipe Was Inferior. The Weld Can Crack Under Normal Operation.
Vehicle recall defect – On Certain Trucks, The Cable End Of The Parking Brake Cable, Where It Attaches To The Parking Brake Lever, Is Designed Improperly. Repeated Normal Parking Brake Operation May Cause The Cable End To Become Improperly Seated In The Parking Brake Lever Groove.
Vehicle recall defect – Routing Of Brake VacuUM Hose From The VacuUM Pump To The Steel VacuUM Pipe Could Allow The Hose To Be Pinched When Cab Assembly Is Raised Or Lowered.
Vehicle recall defect – On Certain Trucks, The Tie Rod End Ball Joint Dust Boot Was Designed With Insufficient Sealing Ability. This Condition Could Allow Contamination To Enter Into The Tie Rod End Ball Joint, Abnormally Wearing The Resin Bearing Located Inside The Joint.