t660

Vehicle recall defect – Paccar Is Recalling 130 My 2004-2009 T2000, T800, T600, W900 And T660 Kenworth Trucks Built With An Ag400 Rear Suspension, Long Stroke Brake Chambers, And Wide Base Tires (Super Singles). These Vehicles May Develop An Increase In Lateral And Vertical Axle Movement. This Movement May Cause Part Or Parts Of The Brake Assembly (Brake Cam Tube Support, Brake Chamber Bracket, Brake Chamber, Brake Spider) To Develop Fatigue Cracks, Possibly Resulting In The Failure Of The Part Or Parts Within The Brake Assembly.

Vehicle recall defect – Kenworth Is Recalling 3,423 My 2004-2009 T2000, T800,T600, W900 And T660 Vehicles. Increased Brake Excitation In A Certain Vehicle Configuration Which Includes Bendix DrUM Brakes, Wide Base Low Profile Single Tires, And An Ag400 Or Ag460 Rear Suspension, Due To Its Unique Brake Clocking And Cam Tube Length, Can Cause Fatigue And Cracking To Brake Assembly Components.

Vehicle recall defect – Paccar Is Recalling 140 My 2005, 2007-2009 T800, W900, And T660 Trucks. The Caliper Mounting Fasteners Attaching The Air Disc Brake Caliper Assembly To The Torque Plate May Have Received Insufficient Torque During The Installation Process. The Insufficient Torque May Allow The Air Disc Brake Caliper Assembly To Become Loose And Possibly Separate From The Vehicle.

Vehicle recall defect – Paccar Is Recalling 130 My 2004-2009 T2000, T800, T600, W900 And T660 Kenworth Trucks Built With An Ag400 Rear Suspension, Long Stroke Brake Chambers, And Wide Base Tires (Super Singles). These Vehicles May Develop An Increase In Lateral And Vertical Axle Movement. This Movement May Cause Part Or Parts Of The Brake Assembly (Brake Cam Tube Support, Brake Chamber Bracket, Brake Chamber, Brake Spider) To Develop Fatigue Cracks, Possibly Resulting In The Failure Of The Part Or Parts Within The Brake Assembly.

Vehicle recall defect – On Certain Trucks, The Removable Tow Hitch ,When Used To Tow Or Lift A Vehicle, Can Fail Due To DefeCTIve Material In The Tow Hitch.

Vehicle recall defect – Kenworth Is Recalling 3,423 My 2004-2009 T2000, T800,T600, W900 And T660 Vehicles. Increased Brake Excitation In A Certain Vehicle Configuration Which Includes Bendix DrUM Brakes, Wide Base Low Profile Single Tires, And An Ag400 Or Ag460 Rear Suspension, Due To Its Unique Brake Clocking And Cam Tube Length, Can Cause Fatigue And Cracking To Brake Assembly Components.

Vehicle recall defect – Paccar Is Recalling Certain Model Year 2008-2012 Kenworth T2000, T660, T700, T800, And W900, As Well As Model Year 2009-2012 Peterbilt 365, 367, 384, 386, 387, 388, 389, And 587 Trucks Equipped With Paccar Mx Engines. The Oil Module Centrifugal Spinner Filter Cap In The Paccar Mx Engine May Become Loose, Possibly Allowing The Cap To Come Off And Engine Oil To Partially Discharge From The Oil Module Onto Exhaust Components.

Vehicle recall defect – Paccar Is Recalling Certain Model Year 2007-2008 Kenworth And Peterbilt Vehicles Manufactured From February 2, 2006 Through April 30, 2007. The Bearing Surfaces Of The Extended Lube Universal Joint That Attaches The Inter-Axle Driveline To The Drive Axle May Become Prematurely Worn Due To Breakdown Of Lubrication And/Or Excessive Heat. Prematurely Worn Bearing Surfaces May Result In The U-Joint Becoming Loose And/Or Binding. This Condition May Result In Universal Joint Failure, Allowing The Inter-Axle Driveline To Detach From The Axle.

Vehicle recall defect – Kenworth Is Recalling 3,423 My 2004-2009 T2000, T800,T600, W900 And T660 Vehicles. Increased Brake Excitation In A Certain Vehicle Configuration Which Includes Bendix DrUM Brakes, Wide Base Low Profile Single Tires, And An Ag400 Or Ag460 Rear Suspension, Due To Its Unique Brake Clocking And Cam Tube Length, Can Cause Fatigue And Cracking To Brake Assembly Components.

Vehicle recall defect – Paccar Is Recalling 140 My 2005, 2007-2009 T800, W900, And T660 Trucks. The Caliper Mounting Fasteners Attaching The Air Disc Brake Caliper Assembly To The Torque Plate May Have Received Insufficient Torque During The Installation Process. The Insufficient Torque May Allow The Air Disc Brake Caliper Assembly To Become Loose And Possibly Separate From The Vehicle.