Vehicle recall defect – On Certain Trailers Equipped With Bendix Sr-5 Trailer Spring Brake Valve Assemblies, The Molded Rubber Face Of The Inlet/Exhaust Valve (I/E Valve) Component Of The Affected Valves Can Separate From The Valve’S Metal Insert. Air Can Be Trapped By A Separated I/E Valve Causing It To Balloon And Block The Exhaust Passage Of The Trailer Spring Brake Circuit.
Vehicle recall defect – Vehicle Description: Trailers Equipped With Bendix Antilock Brake System (Abs) Electronic Control Module (Ecu). The Abs On These Vehicles Does Not Contain The Industry Standard Power Line Carrier (Plc) Chip Required To Provide An Abs MalfunCTIon Signal To The Towing Vehicle As Required By Fmvss No. 121, “Air Brake Systems.”
Vehicle recall defect – Vehicle Description: Tank Trailers. These Trailers Fail To Comply With The Requirements Of Fmvss No. 223, “Rear Impact Guards.” The Rear Guards Have Been Found To Sustain 4.6 Percent Less Load Than Prescribed In The Applicable Regulations.
Vehicle recall defect – On Certain Trailers Equipped With Bendix Sr-5 Trailer Spring Brake Valve Assemblies, The Molded Rubber Face Of The Inlet/Exhaust Valve (I/E Valve) Component Of The Affected Valves Can Separate From The Valve’S Metal Insert. Air Can Be Trapped By A Separated I/E Valve Causing It To Balloon And Block The Exhaust Passage Of The Trailer Spring Brake Circuit.
Vehicle recall defect – Vehicle Description: Tank Trailers. These Trailers Fail To Comply With The Requirements Of Fmvss No. 223, “Rear Impact Guards.” The Rear Guards Have Been Found To Sustain 4.6 Percent Less Load Than Prescribed In The Applicable Regulations.
Vehicle recall defect – Vehicle Description: Tank Trailers. These Trailers Fail To Comply With The Requirements Of Fmvss No. 223, “Rear Impact Guards.” The Rear Guards Have Been Found To Sustain 4.6 Percent Less Load Than Prescribed In The Applicable Regulations.
Vehicle recall defect – On Certain Trailers Equipped With Accuride Aluminum Wheels, The Wheels May Not Have Been Properly Pre-Stressed And May Experience Premature Cracking On The Disc Face That Could Result In Failure.
Vehicle recall defect – Vehicle Description: Tank Trucks And Trailers Using Emco Wheaton Emergency Discharge Valves. The Shear Groove Is Too Close To The Seal Face Of The Valve. In Certain Side Impact Collisions, The Material Around The Valve Seat Can Tear.
Vehicle recall defect – Vehicle Description: Tank Trucks And Trailers Using Emco Wheaton Emergency Discharge Valves. The Shear Groove Is Too Close To The Seal Face Of The Valve. In Certain Side Impact Collisions, The Material Around The Valve Seat Can Tear.
Vehicle recall defect – Walker Stainless Equipment Company Llc (Walker) Is Recalling Certain 2018 Tank Trailers, Equipped With Mpa/Mta Suspensions And Meritor Ex225 Brakes. The Brake Caliper Bolts On These Axles May Not Be Properly Torqued Which Can Allow The Caliper To Detach From The Mounting Flange. As Such, These Vehicles Fail To Comply With The Requirements Of Federal Motor Vehicle Safety Standard (Fmvss) Number 121, “Air Brake Systems.”