Vehicle recall defect – Ce Model School Buses Which Fail To Comply To Federal Motor Vehicle Safety Standard No. 221, School Bus Body Joint Strength. The Roof Top Sheet May Be Improperly Located, Reducing The Material Edge Distance At The Rivet Line.
Vehicle recall defect – Vehicle Description: School Buses Equipped With Flip Seats At The Emergency Exits. The Seat Cushion Hinge On The Combination Flip Seat Is Located In Such A Manner That It Is Within Easy Reach Of The Passenger Sitting In The Seat Located Behind The Combo Flip Seat.
Vehicle recall defect – Certain Fe School And Commercial Buses Built With CE White Driver Seats With A Pedestal Style Mount And Manufactured Between January 10, 1992 Through February 24, 2004. These Pedestals Can Develop Cracks Rendering The Seat Unstable.
Vehicle recall defect – Certain Fe Model School Buses Manufactured From October 14, 1991, And March 4, 2003. A Gap Between The Modesty Panel And The Wheel Well Located Behind The Driver’S Seat Can Be Created If The Panel Is Bent Out Of Position. Under The Panel, The Edges Are Sharp And Jagged.
Vehicle recall defect – Ce Model School Buses Which Fail To Comply To Federal Motor Vehicle Safety Standard No. 221, School Bus Body Joint Strength. The Roof Top Sheet May Be Improperly Located, Reducing The Material Edge Distance At The Rivet Line.
Vehicle recall defect – The Hydraulic Brake System On These Buses Uses Two Hydraulic Pressure Switches To Operate The Brake Lights And The Brake Booster Pump. The Brake Pressure Warning Light Can Activate When Actual System Failure Has Not Occurred.
Vehicle recall defect – The Hydraulic Brake Master Cylinder Has Internal Damage Caused By A MalfunCTIon Of The Automatic Fill Equipment Used In The Chassis Assembly Process.
Vehicle recall defect – The Hand Throttle Cable May Be Mis-Aligned With The Accelerator Rod Causing The Hand Throttle Cable To “Saw” Into The Accelerator Rod. This Can Cause The Accelerator And Hand Throttle Cable To Bind In A Partial Or Full Throttle Position.
Vehicle recall defect – Vehicle Description: School Buses Equipped With Flip Seats At The Emergency Exits. The Seat Cushion Hinge On The Combination Flip Seat Is Located In Such A Manner That It Is Within Easy Reach Of The Passenger Sitting In The Seat Located Behind The Combo Flip Seat.
Vehicle recall defect – Vehicle Description: School Buses. The Emergency Door Hinges That Consist Of Steel Pin Fittings And/Or Lacklubrication Can Bind From Rust And/Or Corrosion.