Dana Dana – 80E019000
Vehicle recall defect – The Drag Link Adaptor Threads May Undergo Abnormal Wear Due To Improper ConneCTIon Of The Adaptor To The Power Steering Valve Housing.
Dana 5480 Brake Hose – 04E045000
Vehicle recall defect – Brake Hose Assemblies With P/N 5478 And 5480 Shipped To Customers Between July 8, 2002, And April 4, 2004, Fail To Comply To Federal Motor Vehicle Safety Standard No. 106, Brake Hoses. These Hoses Failed The Tensile Strength Test Of The Standard. These Hoses Can Be Identified By Reference Which Is Ch.
Dana Dana – 80E007000
Vehicle recall defect – The Defect Involves An Incorrectly Designed Shift Fork. The Shift Fork Was Designed To Activate A Switch Which Would Illuminate A Light On The Dashboard When The Power Take-Off Is Shifted Into Gear. Due To The Incorrect Shift Fork, The Dashboard Light Flashes Momentarily, Then Goes Off.
Dana 5478 Brake Hose – 04E045000
Vehicle recall defect – Brake Hose Assemblies With P/N 5478 And 5480 Shipped To Customers Between July 8, 2002, And April 4, 2004, Fail To Comply To Federal Motor Vehicle Safety Standard No. 106, Brake Hoses. These Hoses Failed The Tensile Strength Test Of The Standard. These Hoses Can Be Identified By Reference Which Is Ch.
Dana Dana – 78E012000
Vehicle recall defect – The Cable Leading From The Speed Control Servo Unit To The Throttle Linkage May Become Entrapped On The Reheostat Adjustment Screw. If Entrapped, The Cable Will Hold The Vehicle Throttle Partially Open Whether Or Not The Speed Control Is Engaged.
Dana 390183 – 00E020001
Vehicle recall defect – Equipment Description: Dana Brake Master Cylinders Part Numbers 390182 And 390183 Manufactured Between May 1995 And April 2000. The Defect Involved Is An Incorrectly Machined Casting Closest To The Mounting Flange Into Which The Proportioning Valve Threads. Master Cylinders Machined According To Print Specifications May Evidence A Gap In The Area Of The Flange And Could Lead To Brake Fluid Leaking From This Outlet.
Dana Dana – 78E005000
Vehicle recall defect – The Outermost Input Bearing Could Fail Due To Insufficient Lubrication. Additionally, The Countershaft Bore Plug Has A Tendency To Move Out Of The Bore In The Transmission Housing. The Result Is Loss Of Lubricant In The Auxiliary Transmission, Which Can Also Cause The Vehicle To Become Immobile.
Dana 390182 – 00E020001
Vehicle recall defect – Equipment Description: Dana Brake Master Cylinders Part Numbers 390182 And 390183 Manufactured Between May 1995 And April 2000. The Defect Involved Is An Incorrectly Machined Casting Closest To The Mounting Flange Into Which The Proportioning Valve Threads. Master Cylinders Machined According To Print Specifications May Evidence A Gap In The Area Of The Flange And Could Lead To Brake Fluid Leaking From This Outlet.
Dana D40-170 – 07E018000
Vehicle recall defect – Certain Dana Drive Axle Housings Manufactured Between November 2006 And February 6, 2007, Model Numbers Listed Above, Installed As Original Equipment On Certain Heavy Duty Trucks. Mis-Marked Steel Was Used During ProduCTIon. The Steel Coil Was Marked As 7/16″ (11 Mm), When It Was In Fact 3/8″ (9Mm). Over Time, The Out Of Specification Steel Could Result In A Fatigue Failure Of The Axle Housing, Most Likely At The Brake Flange. If Unattended, The Axle May Lock Up Or The End Of The Axle Could Come Off.
Dana Commercial Driveshafts – 15E005000
Vehicle recall defect – Dana Driveshaft Manufacturing, Llc (Dana) Is Recalling Certain Commercial Vehicle Lightweight Driveshafts, Model Spl250, Sizes 1610-2200 Or 2220-2830, Manufactured January 2, 2013, Through June 30, 2013. In Affected Driveshafts, The Welded Bond Of The Driveshaft And The Rear Yoke May Fail, Leading To Slippage Between The Driveshaft And Yoke And, Potentially, To Loss Of Torque To The Rear Wheels.